I don't know if you have seen such a news: the diamond ring you just bought has been worn for less than a month, and the diamond on it has fallen off. The most valuable thing about the diamond ring is the sparkling diamond at the top, and now people buy diamond rings, usually as wedding rings, or to commemorate other meaningful days. Diamonds fall, it really makes people feel bad. Even if it is added, it will greatly reduce its position in its own heart.
Why does the diamond fall off? Is it because the diamond ring I bought is not good enough to work, can't pass the quality? Although we do not rule out this reason, in most cases, the shedding of diamonds is not directly related to the work of the diamond ring. Just like the quality of the home appliances will also age, it will be the same, the mosaic is no better, the fine diamond ring for work, there may be diamond looseness or even falling in the process of wearing.
Improper maintenance of diamonds is easy to fall off? ! If you don't pay attention, you will regret it for a lifetime!
Please remember that this is closely related to the choice of setting method and the habit of wearing!
First of all, the choice of different mosaic methods, the risk of diamond shedding is also different. Although the choice of diamond ring should be based on your own preferences, but in the choice to avoid some of the risk of falling off, it will also give you a lot of peace of mind in the future.
In general, there are several ways in which diamonds are most likely to fall off:
1, two sides of the groove
The method of inlaying the singular diamonds on both sides requires a high degree of slotting on the inside of the insert and the insert. Most products are not too large, the diamond is too small, the inner notch is too shallow or blurred, and the groove edge is not tightly pressed on the edge of the crown during the setting, so that the bracket and the diamond Poor fit, causing the diamond to loosen and fall off.
2, buried
Diamond rings are often inlaid with a burying method, and the diamonds used are mostly small drills from 0.02 ct to 0.06 ct. In order to minimize the diamonds, most of the processing techniques are simple to make a small hole in the ring, the diamond is placed flat in the hole, and the metal around the diamond is pressed against the diamond with a winch. The area covered by the diamond crown is generally no more than 10%. The back of the diamond is often narrow and narrow, and it is almost impossible to see the metal traces. It looks very beautiful, but the solid effect of the mosaic is gone, the diamond can Say it when you touch it.
3, two claw inlay
For example, some diamonds only rely on two-prong setting, and the feet are thin. Sometimes, although a small circle is added to hoop the diamond pavilion, since the force point is only two claws, the finger ring is deformed or worn once in actual use. Impulse is easy to cause the diamond to fall off.
After a long period of development, the style of the ring has been difficult to innovate. Therefore, some styles are simply for the sake of innovation, and they sacrifice other needs. Therefore, the inherent deficiency in design is also an important cause of diamond shedding.
Relatively speaking, some mosaic methods are more secure. A more typical example is a six-prong setting and a bezel.
The six-prong setting is the most common and classic setting method on the diamond ring. The claw-set method not only stabilizes the diamond, but also clearly shows the beauty of the diamond.
The inlay is made of all the diamonds in the inlay metal, which prevents the diamond from falling off from all angles. However, it also has the disadvantage of obscuring too much light to make up the light and making the diamond not enough to flash. So how to choose depends on your own preferences.
In addition, in addition to choosing the correct setting method, when selecting, you should pay attention to the production level and setting process of the diamond ring. Those rings with low level and rough setting are best not to buy. It is definitely a smart move to select a well-made diamond jewelry merchant.
On the other hand, wrong wearing habits can also cause the diamond to fall off.
The diamond ring is very dazzling, very beautiful, and of high value, which has a special meaning for the wearer. Therefore, many people wear diamond rings every day, which is generally not easy to pick off. But it is this habit that puts your diamond at greater risk.
Speaking of an easy-to-understand truth, we all don’t wear the same pair of shoes every day, right? Leather shoes will also pay attention to try not to touch the water to extend its life, right? In fact, diamonds are the same. Don't think that it is invincible because it claims to be the hardest substance in the world.
So, what kind of wearing habits should we develop?
Try to avoid the diamond ring colliding, pulling or hooking the clothes. When doing housework, exercise, or heavy physical labor, it is best not to wear a diamond ring to avoid bumps.
Always remember to take off the diamond ring when taking a bath, because the diamond ring is the easiest to fall off when you take a bath. It is easy to accidentally let the diamond fall off after falling on the ground, and the diamond is difficult to find.
If an unavoidable collision occurs, immediately check if the diamond ring is loose. If it is loose, it should not be worn any more. Instead, it should be collected and sent to the jewelry store for inspection and maintenance.
Also check the diamonds for looseness on a regular basis. Use your fingers to gently shake the diamonds to check to avoid the diamonds falling off without your knowledge.
Another thing to remind everyone is that cleaning the diamond ring is also the cause of the diamond falling off. In the process of wearing the diamond ring, it is inevitable that it will be contaminated with dust and the diamond's luster will become dull. Therefore, the diamond ring needs to be cleaned regularly. Some friends will buy the cleaning agent on the market and clean it at home.
Although it is not a problem to choose the right cleaning agent to clean the diamond ring at home, it is best to avoid brushing the edge when cleaning, so it is easy to brush off the diamond. It is also best not to clean the diamond ring directly in the pool. If the diamond accidentally falls off in the clear, it is difficult to find in the pool. If you really want to clean your diamonds at home, it's best to find a container of the right size for cleaning. In order to avoid the above two conditions.
The most reliable way, of course, is to take back the cleaning of the gemstones in the store where you bought the diamond ring.
In general, diamond rings are rarely a problem with diamonds falling, but this does not mean that we can ignore everything when we choose and wear them. No matter how good the jewelry and gems are, they need to be carefully maintained. Otherwise, if there is a situation of falling off or losing, it will make people regret for a lifetime!
Ribbed Fabric,Rib Knit Fabric,Ribbed Cuff Fabric,Cotton Rib Knit Fabric
Suzhou Zhiqin Textile CO.LTD , http://www.zhiqintextile.com